Category Archives: hp

What I noticed about VMware 6.7 and hpssacli vs ssacli

Posted on 2020/02/06 by admin

The HP tooling for use with HP Raid controllers on the ESX cli was called hpssacli. It resided somewhere in in /opt/hp… It is now /opt/smartstorageadmin/ssacli/bin/ssacli Hope this helps you 🙂

Posted in hp, hpssacli, ssacli, VMware | Comments Off on What I noticed about VMware 6.7 and hpssacli vs ssacli

HP 2530-24G (J9773A) OID’s for CRC ERR

Posted on 2019/04/10 by admin

For my own documentation purposes, here are a bunch of OID’s for SNMP monitoring on a HP 2530-24G managed switch. I needed to monitor each port for errors. Apparantly the errors can be obtained using an OID for each port: … Continue reading →

Posted in hp, snmp, switch | Tagged | Comments Off on HP 2530-24G (J9773A) OID’s for CRC ERR

HP Accesspoints and blinking LEDS

Posted on 2018/06/19 by admin

Here’s a list of blinking leds on HP MSM accesspoints and HP 425 accesspoint. I was tired of looking it up all the time, and since these are end-of-life I may well copy that information from HP to my site … Continue reading →

Posted in Access Point, hp, led, wifi | Comments Off on HP Accesspoints and blinking LEDS

Configure SSL on an HP Aruba 2530-48G-PoEP Switch (J9772A)

Posted on 2017/11/02 by admin

Log in admin using ssh (with your favourite ssh client) or (serial) console cable. config crypto pki identity-profile Profile subject Now enter some certificate parameters You can enter all you like, e.g. Enter Common Name(CN) : Switch Enter Org Unit(OU) … Continue reading →

Posted in aruba, cli, hp, switch | Comments Off on Configure SSL on an HP Aruba 2530-48G-PoEP Switch (J9772A)

Checking HP disk status on VMware, command line

Posted on 2016/12/28 by admin

Today, I had to check the disk status of an HP array on VMware Using VMware 6, installed with HP iso, meaning it has HP drivers and tools already installed on VMware, I found it is rather easy to use … Continue reading →

Posted in command line, ESXi, hp | Comments Off on Checking HP disk status on VMware, command line

HP Device Manager installation

Posted on 2016/10/05 by admin

Here’s a quick blurb from todays’ afternoon, quickly testing HP Device Manager in my lan here. (Edit: the sofware that you can use to manage HP Thin/Zero Clients) (On Win2008 R2, will try server 2012 soon) Install .NET 4.5 Install … Continue reading →

Posted in hp, Thin Client | Comments Off on HP Device Manager installation